Project Description
This machine used to coil plate into different sharps such as cylindrical form, conic form and arc, it adopted Japan hydraulic technical.
Top roll can does vertical and level motion, up and down, parallel translation is display. This machine include pre-bending function.
Technical Parameter
| Project | Units | Technical Data |
| Specifications | W11S-8×8000 | |
| Upper roller adding pressure | T | 100 |
| Max width of roll board | mm | 8000 |
| The length of working rolls | mm | 8100 |
| Min diameter with full capacity | mm | 1200 |
| Max thickness of plate pre-bending | mm | 8 |
| Up roll diameter | mm | Φ480 |
| Down roll diameter | mm | Φ280 |
| Distance between two down rolls | mm | 380 |
| Support rolls | Four group | |
| Drive speed | m/min | about 4.0 |
| Max capacity of coiled board : | Mpa | σs≤245 |
| Main motor | kw | 18.5 |
| Hydraulic motor | kw | 7.5 |
| Moving motor | kw | 3 |